300,000 Vehicles’ Seatbelts Could Cause Injuries






Hyundai is recalling 294,128 Hyundai and Genesis vehicles in the U.S. over a front seatbelt problem that could become dangerous in a crash, even if the belt appears to work normally in day-to-day driving. The recall is listed by the National Highway Traffic Safety Administration (NHTSA) as 26V218, and Hyundai’s internal campaign numbers are 298-032G. This is yet another major Hyundai seatbelt-related recall in less than a year, which involved over half a million Palisade SUVs. This time, the problem seems to be with the snap-on clip at the base of the front seatbelts, which prevents the seatbelts from being fully secured to the seat frame.

Hyundai estimates that only 1% of the recalled population may actually have the defect. However, the concerning part is that this is not necessarily a problem a driver would notice before a crash. The seatbelt may still buckle, retract, and feel normal, but if the lower anchor is not secured correctly, it may not restrain the driver or front passenger as intended during impact.

So far, the Korean automaker claims it is aware of six U.S. reports connected to the condition, with no known crashes, injuries, or fatalities. That last part is good news, but not assuring enough to ignore the recall; a seatbelt only has to fail once for the consequences to become severe.

Which Hyundai vehicles are affected and what Hyundai will do to fix them

The largest population affected by this recall involves Hyundai’s latest Santa Fe lineup. Hyundai says 158,001 gas-powered Santa Fe SUVs from the 2024-2026 model years are included, along with 95,268 Santa Fe Hybrid SUVs from 2024-2026 model years. The recall also includes 35,149 Hyundai Ioniq 6 sedans from 2023-2025 and 5,710 Genesis G90 sedans from 2023-2026.

Owners will need to bring their vehicles to a Hyundai dealer or a Genesis retailer for inspection, where technicians will inspect the front seat belt anchors and add a reinforcement insert on the snap-on lower anchor. If the anchor or seatbelt assembly cannot be repaired with the new insert, the dealers will replace the entire seatbelt assembly itself.

The work will be performed free of charge, even if the vehicle is no longer covered by Hyundai’s new vehicle limited warranty, and Hyundai says it will reimburse owners who already paid out of pocket for repairs related to this recall condition. The official filing does not include a “do not drive” or “park outside” warning, but owners should still check their VINs as soon as possible. To find out if your particular Hyundai is a part of this recall, look up your vehicle’s VIN against Hyundai’s official recall lookup page, or use NHTSA’s VIN search.





Source link

Leave a Reply

Subscribe to Our Newsletter

Get our latest articles delivered straight to your inbox. No spam, we promise.

Recent Reviews







Welding isn’t a practice to go into unprepared. It requires numerous tools to do the job correctly and safely, and it’s not a bad idea to invest in a dedicated surface to work on. Fortunately, they’re quite easy to come by; even a budget retailer like Harbor Freight has two different welding tables available. For those with tighter budgets, the Chicago Electric adjustable steel welding table costs $89.99, which is notably wallet-friendly for such a workshop addition. Even better, owner opinions seem to indicate that the low price doesn’t mean low quality.

At the time of writing, the Chicago Electric welding table has just over 2,600 reviews on the Harbor Freight website, with an average rating of 4.6 out of five stars. Over 1,800 of those gave it a perfect five stars, and over 600 gave it a respectable four, with many encouraging others to give it a shot if they’re on the fence. Common highlights include the Chicago Electric welding table’s easy storage and portability, price point, sturdiness, and versatility, and many customers think it’s especially good for anyone new to welding.

All in all, most Harbor Freight customers feel this table gets the job done without breaking the bank. With that said, these positive reviews aren’t the beginning and end of this welding table’s story. Some customers had less-than-stellar experiences that are worth noting.

Potential issues with this Chicago Electric welding table

According to Harbor Freight, this zinc-plated steel Chicago Electric welding table has retractable edge guides, four slots for connecting clamps (and to prevent heat build-up), and can be tilted at five different angles. However, while the features and reviews make it seem like a surefire win at $89.99, it’s not perfect. While they’re in the minority, there are still a notable number of one- and two-star reviews that pinpoint some potential downsides.

One frequent problem is the table arriving warped right out of the box, which can make setting up and welding harder than necessary. The same can be said for the uneven legs, which many customers had to contend with. Some also warned of missing or completely incorrect hardware, preventing them from assembling the table. Elsewhere online, YouTuber Rob Pantridge wasn’t impressed with the build quality and found the design lacking in a few areas. Fellow YouTuber Jeff Estes Builds didn’t hate it, but also didn’t feel it was a necessary purchase for more serious welders.

Harbor Freight is the home of several useful welding accessories, along with table options like the Chicago Electric steel-top example to use them on. While it is cost-effective and many customers love it, this particular welding table may not be the right purchase for everyone. That is a matter only your wants, needs, budget, and experience level can decide.





Source link