With more than 1,600 stores in its network, most DIYers won’t have to drive far to find their nearest Harbor Freight. Increasingly, the chain has become an appealing place to shop for budget-conscious professionals too, with Harbor Freight offering a range of higher quality pro-oriented brands alongside its classic DIY lines. These professional Harbor Freight brands undercut many of their big-brand competitors on price, but that doesn’t mean that they compromise on either performance or durability.

In fact, the opposite can be true: In some cases, Harbor Freight’s professional-oriented tools can even exceed their big-brand competitors’ performance in real-world independent testing. These 10 tools are just a very small selection from the retailer’s current range of professional-grade products, with each one boasting a spec sheet that matches or exceeds similarly-oriented tools from big-name brands. Many of them have been benchmarked against market-leading professional products from Milwaukee, Snap-On, and DeWalt, and have matched or even beaten those rivals.

Harbor Freight’s Hercules brand has earned a reputation for offering high-powered tools at much lower prices than its competition, with some of its tools even being more powerful than equivalents from Milwaukee. Its ¾-inch impact wrench is one such tool, with 1,650 ft-lbs of breakaway torque and 1,100 ft-lbs of fastening torque on offer. In tool-only form, the ¾-inch ultra torque impact wrench is available from Harbor Freight for $219.99 at time of writing.

The brand recommends pairing the tool with at least a 4Ah battery, but since all Hercules 20V battery packs are interchangeable, users can power it with whichever compatible pack they have on hand. The impact wrench comes with several features that are designed to appeal to professional users, from the automatic tightening mode to the tough metal gear construction. To add to its appeal, Hercules offers the tool with a 5-year standard warranty, which equals the one offered by Milwaukee.

Since their launch, Icon’s G2 ratchets have gained plenty of fans among both hobbyists and professionals. Various tests have pitted the Icon G2 ratchets against those from Snap-On, and the results were surprisingly close given the huge difference in price between both brands. While some performance tests by YouTubers like Torque Test Channel saw Icon actually beat Snap-On by a small margin, the general consensus is that Snap-On has the overall edge overall.

Still, the fact that a Harbor Freight tool and a Snap-On equivalent are being compared so comprehensively is evidence of just how good the Icon G2 ratchets are for their price. The ½-inch drive, 26 inch long locking flex ratchet is available for $119.99, which is less than half the price of its Snap-On competitor. Icon offers a large range of sizes and ratchet types too, and still continues to add to its range over a year after the original batch of G2 ratchets were announced.

Another example of Hercules matching its competitors’ spec sheets while undercutting them on price is the brand’s 20V drywall cut-out tool. Its motor reaches a peak of 27,000 rpm, which is 1,000 rpm more than DeWalt’s equivalent 20V Max tool can manage. Yet, Hercules’ tool costs just 25 percent of its DeWalt rival, with a retail price of just $49 in tool-only form. Both products feature a similar design with a built-in LED work light and a tool-free bit change, and both are compatible with any battery pack in their respective makers’ 20V line.

The Hercules tool accepts both ¼-inch and ⅛-inch collets and includes a belt hook for easy transportation around the jobsite. Hercules even handily includes an ⅛-inch bit with the price of the tool. The Harbor Freight brand’s 5-year cordless tool warranty is also notably more generous than DeWalt’s warranty, with the latter brand only offering 3 years of coverage as standard.

At a retail price of $249.99, the Earthquake XT ¾-inch composite air impact wrench still isn’t a small investment, but it’s far cheaper than its Snap-On equivalent. Compare the two and the difference in performance isn’t as great as the difference in price, with Harbor Freight’s tool holding up surprisingly well in testing. Professionals looking for top-tier durability might be concerned by the Earthquake impact wrench’s measly standard 90 day warranty, but on performance alone, it’s a true rival to the biggest brands on the market.

According to its maker, the Earthquake tool delivers 1,300 ft-lbs of fastening torque and 1,800 ft-lbs of bolt breakaway torque. The forward and reverse button is designed to be used with one hand, and since the tool housing is made from composite, it’s lighter than an all-metal equivalent, making it more comfortable during extended use.

It’s one of a range of professional-grade tools that Harbor Freight’s Earthquake XT brand offers, with other products in its current lineup including a ⅜-inch impacting air ratchet wrench and a D-handle composite air impact wrench that delivers up to 3,000 ft-lbs of torque.

The Hercules 20V 5-inch random orbit sander is powered by the same interchangeable battery packs that are used by its other cordless power tools, and it retails in tool-only form for $54.99. Hercules says that a 5Ah battery pack should be enough to allow 40 minutes of runtime while coaxing the tool’s brushless motor to a maximum 12,000 oscillations per minute (opm). Underneath, the sandpaper is kept in place with a straightforward hook-and-loop system, which should help minimize downtime between changes.

Corded professional-grade equivalents like Makita’s 5-inch random orbit sander offer unlimited runtime, but they don’t offer any increased power compared to the Hercules tool. The Makita sander’s motor still reaches the same 12,000 opm. In a pattern that should be familiar by now, the corded Makita sander is also significantly more expensive than the cordless Hercules tool. Plus, Makita’s single year of standard warranty can’t come close to the 5 years of cover offered on the Harbor Freight sander.

A significant number of Harbor Freight’s professional-oriented tools are what you might call “heavily inspired” by the designs of their big-brand competitors. The Daytona line of floor jacks was so similar to Snap-On’s floor jack that Snap-On even sued the budget tool retailer in 2016, but the case was dismissed before it made it to trial. As a result, Harbor Freight continues to sell Daytona jacks today, including its 3 ton long-reach, low-profile floor jack, which retails for $269.99.

The jack can lift loads of up to 6,000 pounds to a maximum height of 24-¼ inches. Daytona’s Rapid Pump system helps reduce the amount of work it takes to reach working height, with the brand claiming that it should take an average of 3-½ pumps to lift a load. According to Daytona, the jack also complies with ASME-PASE safety standards.

Daytona is Harbor Freight’s main professional-oriented jack brand, but it isn’t the only brand within the retailer that sells jacks. Pittsburgh is a cheaper in-house alternative that’s targeted more towards hobbyist and infrequent users, while the Badland brand produces off-road jacks. Almost all of the floor jacks from all three brands are advertised as meeting the same professional-level safety standards, regardless of their price point or intended use.

Atlas is Harbor Freight’s electric, professional-grade outdoor tools brand, and one of its newest products is its 80V auger. It runs using the brand’s 80V interchangeable battery system, which is one of two cordless tool lines that it currently offers, the other being a 40V-capacity battery. Buying two separate sets of batteries for different lines of tools from such a small brand wouldn’t be cost effective, but Atlas’ 80V battery packs are dual-voltage and so are able to be used with the brand’s 40V tools.

The cheapest dual-voltage battery pack available at the time of writing costs $139.99, while the cheapest Atlas charger retails for $59.99. The auger itself costs $299.99, giving buyers who are new to the Atlas brand a total minimum setup cost of $499.97. As usual, that’s still cheaper than equivalent electric auger kits from major tool brands like Makita, but it’s double the price of Harbor Freight’s Predator gas-powered auger.

At least buyers of the Atlas auger get a suitably powerful tool for their investment. The brand says that it can drill 54 holes on a fully charged 4Ah battery with 70 ft-lbs of torque, which equates to double the power of the closest DIY-focused auger from Ryobi.

Some of Icon’s professional-grade tools have a wider appeal that are just as attractive to dedicated home mechanics, while others are more niche products aimed squarely at professional shop use. The T10 professional comprehensive diagnostic scanner falls into the second camp, and it retails for $1,699.99. It’s equipped to conduct a range of tests, including battery evaluation and borescope inspection, as well as diagnosing faults via a car’s OBD-II port and DoIP. A 10.1-inch touchscreen is the tool’s main interface.

Repairs are suggested via TrueFix, an Icon-exclusive, OEM-level software platform which requires a separate subscription. Harbor Freight includes a full year of TrueFix access with the purchase of the T10 scanner, as well as covering the entire kit with a year of standard warranty. In case the name didn’t already make its inspiration obvious enough, Icon explicitly compares the scanner to Snap-On’s Triton-D10 in its marketing, highlighting the thousands of dollars it claims buyers can save by opting for its own tool instead.

While it might be a cheaper alternative to Milwaukee’s products, Hercules 20V drill/driver is no less powerful. It offers up to 1,200 in-lbs of torque, up to 32,000 blows per minute, 14 clutch settings to suit a variety of jobs, and the same 5-year warranty that covers other power tools in the line. The spec sheet looks as good as its price, with the ½-inch compact hammer drill/driver retailing for $79.99 in tool-only form.

Batteries aren’t included, and runtime will vary significantly based on the capacity of the pack that buyers choose to use with the tool. Anyone using an 8Ah Hercules battery pack and drilling concrete with a ⅜-inch masonry bit can expect to get through 110 holes on a charge, per the brand’s estimates.

It should be both powerful and long-lasting, but it won’t be cumbersome to use. The tool weighs just 3.3 pounds, and it features the same textured grip that can be found on many of the brand’s other tools. When it’s not in use, the included belt clip should make it easy to carry around a jobsite.

Some of the other professional-grade picks here are complex, multi-talented tools that perform a range of different functions and can be used for a variety of jobs. In contrast, the Atlas 80V dual-port backpack blower kit has just one job: clear leaves, dust, and debris out of the way. It’s critically important that it does that job well then, and to do that, it needs to be powerful enough to shift even the most stubborn piles of debris. Luckily, its 760 cubic feet per minute (cfm) peak airflow and 190 mph peak air speed is comparable to some of the most powerful electric leaf blowers from major brands.

You might expect that such a high level of power comes at a high cost, and you wouldn’t be wrong. A retail price of $499.99 puts the blower kit out of budget for most home landscapers, but it’s not an especially high price for a professional-grade kit. For reference, DeWalt’s 60V backpack blower retails for $549 as a bare tool. For $50 less, Atlas throws in two 4Ah batteries and a rapid charger with its kit. Those same batteries can also be used with any other Atlas 40V or 80V tool, since they’re dual-voltage compatible.