Is Your Whirlpool Washer Walking Across The Floor? This Might Be Why






We may receive a commission on purchases made from links.

Among the major washing machine brands, Whirlpool isn’t far from number one. The company definitely makes good products, but what happens if your Whirlpool washer starts “walking” across the floor during a washing cycle? Fortunately, that doesn’t automatically mean it’s bound for scrap. In fact, there is a common reason this can happen with a Whirlpool — or any other brand, for that matter: You forgot to remove the shipping bolts.

Transport is hard on appliances like washing machines, so manufacturers have taken precautions to prevent damage by installing shipping bolts. On front-loading units, the drum (where the clothes go) is attached to suspension springs and shock absorbers. The problem is that the drum can unhook from those springs during transport, especially if it experiences bumps or jolts. This leaves the drum loose inside the unit, damaging the seals and causing it to become misaligned.

Shipping bolts are specialized fasteners that secure the drum in place, preventing undue movement. However, if you attempt to run the machine with the shipping bolts still inserted, the drum can’t function properly, resulting in significant vibration that can cause the whole machine to tiptoe forward. Whirlpool provides this handy guide to removing shipping bolts and getting your washer running smoothly again.

What if you’ve removed the shipping bolts but the washer is still walking?

If your washer is still moving with the shipping bolts removed, there are a few other possibilities you can explore before calling in an appliance repair technician. Firstly, look out for unbalanced loads. While loading dirty clothes into a front loader seems self-explanatory, certain heavier items like towels or blankets can bunch up in one section of the drum instead of being distributed evenly across it. So, if you notice movement or extra noise during a wash cycle, stop it and move the clothes around the drum to better distribute the weight.

Another likely culprit for a washing machine moving around during a cycle is the feet. These units feature four rubber feet that can be adjusted to level the unit for optimal operation. Stop the machine and then place your hands on either side of the washer and gently rock it back and forth. If it moves, the feet are likely sitting unevenly. These feet can be adjusted by twisting with a tool like a wrench to raise or lower them. For detailed instructions, Whirlpool provides a step-by-step process for leveling a washer.

Running an unbalanced washing machine — whether it’s the loads you put in or the washer itself — may take a toll on inner components like the suspension and drum bearings. This can, in turn, affect how long your Whirlpool washer and dryer will last, so you’ll want to be careful here.





Source link

Leave a Reply

Subscribe to Our Newsletter

Get our latest articles delivered straight to your inbox. No spam, we promise.

Recent Reviews






It’s easy to assume that vehicles all had internal combustion engines until very recently. Gasoline and petrol engines were the standard for decades, after all, so why would early vehicles be any different? In reality, the early days of the automobile era were more varied than you might expect, and even featured a range of electric cars. Yes, despite electric vehicles not truly taking off until the 21st century, the first electric vehicles are much older than you think; drivers in the 1900s were going around town in electric vehicles — and where there are EVs, there are charging stations.

One such station, visible in the image above, was the creation of General Electric. Formally called the mercury arc rectifier, it took alternating current and sent it through vaporized mercury in a glass tube. This converted it into direct current, which powered up the EV’s battery. The woman in the image, who’s charging a Columbia Mark 68 Victrola, is standing at the control panel, which allowed a user to adjust power levels. 

These chargers could be installed everywhere, including homes, businesses, and public parking garages, supporting the electric vehicle boom of the early 20th century. While 21st-century EV chargers have come a long way from where they were, the basic building blocks are all still there, and it’s fascinating to see.

How EV chargers have evolved since the early 20th century

EV charging has changed a lot in some ways — but not in others. At the core of it all is the aforementioned conversion from AC to DC, which still happens when you charge modern EVs at standard charging stations. The difference is that your vehicle’s on-board charger performs the conversion, not the charger. Old EV chargers took between several hours and a day to charge, and current-day units can similarly take a few hours to well over a day from empty, depending on the charger’s speed. Fast chargers, which provide DC directly, can cut this down to around an hour or less.

Old-school and modern EV chargers also differ in how they provide power to the vehicle. Mercury arc rectifiers connected directly to the negative terminal of the lead-acid battery that needed charging. Nowadays, EVs use dedicated charging ports. Battery swapping was also commonplace in the early 1900s, and companies like General Electric tried to cash in by offering to replace drivers’ old, run-down batteries with new ones for a fee. That’s not yet possible with most mainstream EVs, although companies like Stellantis have tried to introduce EV battery swapping with moderate success.

Even if they were unrefined compared to today’s models, early EVs seemed to be on to something. Why, then, did electric cars fail, and how did gasoline end up becoming the predominant power source for vehicles?

What led to the downfall of the original wave of electric cars

EVs were no mere fad in the 1900s and 1910s. According to the 1900 United States census, 1,575 of the 4,192 vehicles sold that year were electric, with the value of these early EVs — $2,873,464 — accounting for more than half of the total market value of $4,899,443. It wasn’t just EVs, either; other sources of propulsion, like steam, were also vying for a foothold in the automobile market. By the 1920s and 1930s, though, these had all been superseded by the internal combustion engine.

One of the major drawbacks of early EVs was the fact that electricity was not yet widely available. Electrical hookups were a rarity outside of major cities, limiting the use of these vehicles. The lead-acid batteries they used also had their fair share of issues. They needed to be inspected, cleaned, and repaired every few days, making them more of an inconvenience than anything. Worse yet, they had poor mileage, and, with chargers possibly out of reach, many likely didn’t want to risk being stranded while out for a drive.

Eventually, price reductions for gas cars and improvements such as electric starters and better reliability prompted buyers and automakers alike to move away from electric rides. Thus, while the best-selling EVs of 2026 show that it’s a good time for EVs, this electric boom plainly isn’t the first of its kind. Early EVs eventually fizzled out, but they still set the stage for our current fascination with electric vehicles.





Source link