Why I built my own DIY cyberdeck straight out of 80s sci-fi – and how you can too


Overclocked Raspberry Pi being stress-tested to see if it is stable

My Raspberry Pi cyberdeck.

Adrian Kingsley-Hughes/ZDNET

Follow ZDNET: Add us as a preferred source on Google.


ZDNET’s key takeaways

  • The cyberdeck name comes from the 1984 novel Neuromancer.
  • They’re DIY computers that can be based on a cyberpunk vibe.
  • If you don’t fancy building a cyberdeck, why not try buying your own?

Everyone seems to be talking about cyberdecks. At the risk of mixing up sci-fi genres, that’s a name that I’ve not heard in a long time. No, cyberdecks aren’t a Star Wars thing. Instead, the term was coined by William Gibson in the 1984 near-future dystopian cyberpunk novel, Neuromancer.

In the novel, hackers, called “console cowboys,” would use cyberdecks to hook up to cyberspace (another term that Gibson came up with, two years earlier in a short story called Burning Chrome). In the book, they’re described as custom-built, rectangular, deck-like computers with red and green LEDs that are used to jack into the matrix (yes, Gibson used that term too).

Also: The Flipper One is the Linux cyberdeck I wish my Raspberry Pi could be

Similar devices have also appeared in movies such as Blade Runner, Mad Max, and Alien.

Fast forward to 2026, and it seems that people are building cyberdecks. But what are they, why are people excited about them, and how do you get your own?

What is a cyberdeck?

Bottom line, it’s a portable computer. At the risk of upsetting people in the maker and hacker communities, a cyberdeck can be pretty much anything that you want it to be.

Also: These retro-style speakers brought new life to my audio library – and they look great

Given their origin, cyberdecks usually have a cyberpunk/retro/dystopian/post-apocalyptic look and feel, but they don’t have to. Sure, you can go for the full-on cyberpunk look, but a cyberdeck can also be a basic, utilitarian computer, or you can even build one inside an Altoids tin or Grandma’s biscuit tin.

Yes, an entire computer inside a tin.

Or it can be an off-the-shelf system made to look cool… although if you post about your creation on Reddit, don’t be surprised if someone posts this meme in response to it.

If it’s a computer, and there’s a screen or an HMD (head-mounted display), and a keyboard that can be physical or virtual, it can be a cyberdeck. I’m not going to be a gatekeeper on people’s fun and creativity.

So, what do you need to build a cyberdeck?

Well, given my “a cyberdeck can be anything you want it to be” stance, this is where things start to get somewhat vague. But that doesn’t mean I can’t give you some pointers, along with a look at a simple yet powerful cyberdeck that I built a while back.

A computer

You need a computer. Something small yet powerful. Fortunately, we live in a time when there are no shortages of single-board computers (SBCs) to choose from. You could go for the somewhat traditional Raspberry Pi 4 or 5, go for the smaller Raspberry Pi Zero 2, or go for something more obscure like a BeagleBone or Banana Pi board.

The Raspberry Pi 5 - A powerhouse at the heart of many cyberdecks!

The Raspberry Pi 5 – A powerhouse at the heart of many cyberdecks!

Adrian Kingsley-Hughes/ZDNET

If this is your first build, I strongly suggest that you use a Raspberry Pi, either the full-sized boards or a Zero. These are very popular options, so there’s going to be information, parts, and accessories out there.

A display

Plenty of options here, from the standard Raspberry Pi touchscreen display to something smaller like the PiSugar Whisplay HAT.

A keyboard

This is where the myriad of tiny Bluetooth keyboards comes in handy. You can get something tiny, folding, or weird-looking to suit your needs. Many come with a built-in trackpad, which is a great way to interface with your cyberdeck.

Also: The best Raspberry Pi alternatives of 2026: Expert recommended

Think that it’s cheating to buy a keyboard? You can make one if you really want Yes, even down to the circuit board. I’ll be honest with you, that’s more effort than I want to put into one, but it’s a great way to learn a whole bunch of skills.

Power

Your cyberdeck will need power. Again, if your system is built around a Raspberry Pi, there are plenty of options. You can use 18650 lithium-ion batteries and a controller board, or you can choose a board that has a built-in battery.

Also: This ‘cardputer’ sits between the Raspberry Pi and Flipper Zero – but it’s uniquely better

You could also choose a small power bank that has its own controller and connect that to the board’s power port. If you’re taking a less-trodden path when it comes to SBCs, you’ll have to do a bit of research and find what’s available for you.

A case

Here you’ve got the option of an off-the-shelf case, especially if you’ve taken the Raspberry Pi route, because there are a lot of third-party cases out there for those boards, or you can repurpose something like a tin box.

Also: 7 useful things I can do with my Flipper Zero – as someone who’s used it for years

If you’ve got a 3D printer, you can custom-build your own case. You can find hundreds of designs for cyberdeck cases that you can 3D print yourself at home, or you can buy pre-printed cases (these command a premium price compared to how much they’d cost you to print yourself, but they are a great option for those without access to a printer).

Can you buy a cyberdeck?

Yes.

Trawl the shelves of eBay or Etsy and you’ll find ready-made systems, although they’re not cheap. If you wanted something cheaper, you could grab a Raspberry Pi 500 and add a display.

Or there’s a Cardputer, which is one of the tiniest systems I’ve used.

The Flipper One could be the first true cyberdeck system.

The Flipper One could be the first true cyberdeck system.

Flipper Devices

Then there’s the Flipper Zero, a real-life hacking tool. Or, and I think this will probably be the closest thing to a real-life cyberdeck, there’s a Flipper One in the works that looks absolutely incredible.

Also: The Flipper One may be the ultimate Linux PC for hackers in 2026 – and I’m excited

It’s mostly a case of what you want your cyberdeck to do and how much you want to spend.

My cyberdeck

My “cyberdeck” (I put that in quotes because it was never built as a cyberdeck, but as a tool) is a system I built out of an overclocked Raspberry Pi that I installed Kali Linux onto.

Kali Linux booting up on a Raspberry Pi.

Kali Linux booting up on a Raspberry Pi.

Adrian Kingsley-Hughes/ZDNET

Kali, for those who haven’t come across it before, is a Debian-based Linux distro that’s built for very specific tasks, such as penetration testing, digital forensics, and ethical hacking. Kali is a massive topic in and of itself, and not for the faint of heart, but it’s also a super powerful platform, even when installed on Raspberry Pi hardware.

Also: 8 Linux distros I always recommend first to developers – and why

I recently upgraded the SBC from a Pi 4 to a Pi 5, and that meant upgrading the touch screen because that wasn’t compatible with the new board. I also upgraded the Wi-Fi to get more advanced capabilities. Yes, I could have bought something off-the-shelf that would have worked just as well — maybe better — but I’m super pleased with the system.

It’s fast, versatile, and highly reliable.

I’ve toyed with making a custom case, but that’s one of those projects for a day when I’ve not much to do, and lately those have been thin on the ground.

Do you need a cyberdeck?

Yes. No. Maybe.

It really depends on you and what your needs are.

Also: Why my Raspberry Pi boards suddenly cost as much as a laptop now – and I’m not surprised

Need a tool to do a job? Then there are probably cheaper, easier options that you can buy off-the-shelf. But if you want a tool that’s fun to build, looks cool, and is still practical, then a cyberdeck might be just what you want in your life. They’re also a cool, fun way to get children interested in various aspects of tech. I know quite a few parents who have used cyberdecks as a springboard for a number of cool projects that their kids have enjoyed.

And there’s nothing wrong with just wanting one because they’re cool and you want to be a console cowboy.





Source link

Leave a Reply

Subscribe to Our Newsletter

Get our latest articles delivered straight to your inbox. No spam, we promise.

Recent Reviews


The McCarthy Road opened as a passage to the greatest copper strike the world has ever known. More than one billion pounds of copper once traveled down this corridor from the Kennecott Mines to the coast. Today, travelers head the opposite direction—up the road—to experience staggering scenery, deep wilderness, and some of Alaska’s most authentic adventures inside America’s largest national park.

The road is as notorious as it is remote, with some sources recommending satellite phones as routine safety gear. We’re here to share not only what we learned firsthand from driving the McCarthy Road ourselves, but also insights from Neil Darish, McCarthy’s outspoken statesman and longtime steward of the area. He told us that from the 1970s until about 2006 McCarthy Road was a real struggle for most people. It’s simply not like that anymore but the old stories abound. We wanted to find out for ourselves.

Wilderness adventures always carry some level of risk. But understanding what you’re getting into—and how to prepare—can turn the McCarthy Road from an intimidating unknown into one of Alaska’s most rewarding journeys.

How Long Is the McCarthy Road?

Yellow line on highway on the way to Road to McCarthy Alaska
Photo Credit: Jenn Coleman.

The McCarthy Road runs 59.4 miles from the State Wayside in Chitina (pronounced “Chit-na”) to the McCarthy Footbridge across the Kennicott River. It follows the route of the former 196-mile Copper River & Northwestern Railway, which once connected the mines to the port of Cordova.

When the mines closed in 1938, much of the track was salvaged for scrap. Floods, earthquakes, and time itself took out many bridges, leaving Kennecott and McCarthy isolated—preserved in a kind of remote time capsule that still defines the experience today.

Is the McCarthy Road Paved?

Signage on Road to McCarthy Alaska
Photo Credit: Jenn Coleman.

Mostly, no.

The McCarthy Road is primarily gravel, but for travelers willing to leave the pavement behind, it provides access to some of the most dramatic natural and historic landscapes in Wrangell–St. Elias National Park, including McCarthy and Kennecott.

Reconstruction began in earnest in the 1970s, when modern steel and concrete bridges replaced their wooden predecessors and fresh gravel was laid atop the old rail bed. What remains is rough but intentional, functional enough to reach the end, and wild enough to remind you where you are.

What Are the Road Conditions Like?

Blue bronco driving on Road to McCarthy Alaska
Photo Credit: Jenn Coleman.

The McCarthy Road is narrow and winding but relatively flat. The first few miles from Chitina toward the Copper River are paved, with occasional paved sections on steeper grades to reduce rutting.

Ironically, some of the worst potholes appear in those paved stretches, while the gravel sections are often smoother—albeit dusty and washboarded. According to the National Park Service, “under normal summer conditions, most passenger vehicles can make the trip.” That said, conditions can change quickly with weather.

How Long Does It Take to Get to McCarthy?

Highway on the way to McCarthy - Road to McCarthy Alaska
Photo Credit: Jenn Coleman.

Plan on 2–3 hours to drive from Chitina to the McCarthy Footbridge if you’re moving steadily and traffic is light. Summer weekends, especially around the Fourth of July, bring heavier traffic. It’s not gridlock, but passing opportunities are limited, and you’ll often move at the pace of the slowest vehicle.

Our advice? Drive patiently. Leave space. And when the dust gets thick, it’s often better to pull over for a photo than to white-knuckle it behind a convoy.

From Anchorage, it’s about 4.5 hours to Chitina without stops, but you’ll want to fuel up before committing to McCarthy Road. Once you park at the footbridge, it’s about a 20-minute walk into McCarthy proper.

What Is the Closest Gas Station?

Gas station - Road to McCarthy Alaska
Photo Credit: Jenn Coleman.

The closest gas station to McCarthy is in Chitina. It’s a 24-hour, credit-card-only pump with no additional services.

There is a full service station in Kenny Lake, about 90 miles from McCarthy (180 miles round trip), which offers a more comfortable fuel buffer for most vehicles. Glennallen is the last full-service town, but at 250 miles round trip, it leaves little margin unless you plan carefully, or only use it as one of the mandatory gas stops.

Can I Take a Rental Car on McCarthy Road?

Alaska 4x4 counter at Anchorage Airport
Photo Credit: Jenn Coleman.

Most national rental car companies prohibit driving to McCarthy altogether. We rented from Alaska 4×4 at the Anchorage airport and had no issues.

Not only was it permitted, but we ended up with a sweet Bronco that had excellent clearance and fresh tires. We never needed four-wheel drive, but it was reassuring to have a vehicle built for roads like this. It also made the washboard roll on the gentle cycle.

Darrish said that his guests at McCarthy Lodge Resort get scared by the warning signs at the start of McCarthy Road, but their fear isn’t justified. He said in 2006 the state DOT removed the railroad spikes by using a magnetized trailer behind a grader. When you see or read stories about taking extra tires, it’s based on 2006 and before information.

Also he said, when you see the warning sign at the beginning of McCarthy Road, telling you to take emergency equipment with you; and warning you not to travel this road because it’s “not advised” it’s important to note that’s a winter based sign!! not relevant for summer visitors!!

Is There Cell Service Along the Road?

Big bridge on Road to McCarthy Alaska
Photo Credit: Jenn Coleman.

Officially, coverage is “very limited.” Some sources go so far as to recommend carrying a satellite phone.

In practice, we had surprisingly usable Verizon service during our fall 2025 drive, though we wouldn’t count on it being consistent—or available in an emergency. Treat any cell signal as a bonus, not a plan and pay heed to the sections on car and wilderness emergency kits. Also, be sure to notify somebody you trust that you’re heading out into the wilderness, be it for hiking or driving the McCarthy Road. Darish confirmed that he finds that Verizon works on most of McCarthy Road.

What Can You See Along the Way?

Copper River Rest Area Road to McCarthy Alaska
Photo Credit: Jenn Coleman.

The McCarthy Road isn’t something to endure on the way to a destination—it is the destination.

Almost immediately after leaving Chitina, you pass through the Rock Cut, a former rail tunnel that’s now open to the sky which feels like a threshold between civilization and something wilder. At first, the road hugs the Copper and Chitina Rivers with expansive views, culminating at the Copper River Bridge.

Next, you’ll pass a chain of small lakes before reaching the single-lane Kuskulana River Bridge, often the most nerve-wracking moment for first-time drivers as you pass 238 feet above the raging Kushkulana River. The Chokosna, Gilahina, and Lakina Rivers are especially photogenic, with remnants of historic railroad trestles near the Gilihina Bridge. Long Lake lives up to its name, stretching alongside the road for more than two miles before you get your first views of the rocky Kennicott Glacier.

Darish gave us his best pro tip to truly enjoy McCarthy Road. Leaving the population centers like Anchorage Denali or Fairbanks while everyone is still asleep is a total Alaska Travel pro-tip. You’re far more likely to see wildlife along the way when the roads are empty. In addition, you’ll arrive on the McCarthy Road around 11am instead of 4pm- there’s less traffic – and you’re less likely to be behind another vehicle, even in peak July traffic.

What Services Are Available?

Available services - Road to McCarthy Alaska
Photo Credit: Jenn Coleman.

There are no service stations along the McCarthy Road, so self-sufficiency is key.

A small trading post in Chokosna sells limited snacks and drinks about halfway through the drive. Once you reach the end of the road, you’ll find espresso, food, and parking before the Kennicott River. Along the way, wayside pullouts appear roughly every 10 miles, offering parking, picnic tables, and vault toilets.

What Should You Pack in a Car Emergency Kit?

Blue bronco on Road to McCarthy Alaska
Photo Credit: Jenn Coleman.

The best emergency plan is prevention: drive slowly, check fluids, inspect tires, and make sure you have enough gas and windshield washer fluid to handle 120 dusty miles.

At minimum, you should carry:

  • A full-size spare tire
  • A working jack
  • Knowledge of how to change a tire
  • Phone charger

If you’re traveling Alaska backroads regularly, an expanded kit is wise:

What Should You Pack in a Wilderness Survival Kit?

Wilderness Survival Kit - Road to McCarthy Alaska
Photo Credit: Jenn Coleman.

With regular summer traffic, a true breakdown shouldn’t leave you stranded more than 24 hours, but preparation still matters.

Essentials include:

  • One gallon of water (for you or the vehicle)
  • Warm clothing and blankets (do not idle your car for heat)
  • No unsecured food—bear safety matters even in your vehicle (a good idea for parking too)
  • Toilet paper and a shovel
  • Essential medications
  • First-aid kit

If you’re unsure about how to keep food safe from bears, it’s best to err on the side of no food at all.

Is There an Interactive Map?

Google maps on phone
Photo Credit: Jenn Coleman.

We’re unapologetic map geeks at Coleman Concierge, so we built a custom McCarthy Road map with every stop mentioned here, and then some. We used native Google pins whenever possible for better metadata and crowd-sourced photos.

For next-level planning, open it in Google Earth to explore the terrain in 3D or drop into Street View for snapshots of the road from years past. On your phone, it works as a live navigation companion. Pair it with the National Park Service audio tour for an even deeper experience:
https://www.nps.gov/wrst/learn/photosmultimedia/audio-tours.htm

How Do You Get Into McCarthy?

Road sign on the road to McCarthy Alaska
Photo Credit: Jenn Coleman.

First: Google Maps lies.

You cannot drive directly into McCarthy proper unless you have access to a private bridge. Park at the end of the McCarthy Road and cross the footbridge on foot.

Paid parking is available at Base Camp Kennicott and McCarthy River Tours. McCarthy River Tours is slightly cheaper but farther away. Pro tip: drop passengers and luggage at the bridge first, then park. Carts are available to move bags across the bridge.

Shuttles operate from the far side of the bridge to McCarthy and Kennecott. Some activities include transportation and sometimes parking such as flightseeing with Wrangell Mountain Air, some wilderness adventures with St. Elias Alpine Guides, and stays at the Kennicott Glacier Lodge. McCarthy Lodge offers shuttle service for a fee on a per ride or per day basis. You can also walk the scenic ¾-mile road into town.

How Long Should You Stay?

Dog in McCarthy Alaska
Photo Credit: Jenn Coleman.

Our rule of thumb: stay at least as long as it takes to get there.

From Anchorage, that’s a full day each way, so plan for at least two nights in McCarthy. Fortunately, there’s more than enough to fill that time.

Two days allows for a flightseeing tour paired with rafting or hiking one day, and a glacier hike plus the Kennecott Mill tour the next. Leave time to wander Kennecott, soak up the history, and experience the Golden Saloon, the only saloon located inside a national park.

You can learn more about what to do in McCarthy from our practical guide or our photo heavy inspiration piece. You can even read both. We double dog dare you.

Are There Alternatives to Driving?

McCarthy Airport
Photo Credit: Jenn Coleman.

If the McCarthy Road still doesn’t feel right, you have options.

Flying is the easiest—scheduled service runs from Gulkana and Chitina, with charter flights available from Anchorage. It’s also the most expensive and comes with weight limits. While scenic, it doesn’t replace the experience of a dedicated flightseeing tour.

Shuttles from Chitina are another option and cost less than flying, though you still need to reach Chitina. Still, for travelers willing to leave the pavement behind, driving the McCarthy Road offers the best value—and one of Alaska’s most memorable journeys. It doesn’t just take you somewhere wild. It asks you to meet Alaska on its terms.

Disclosure: A big thank you to Alaska 4×4 for providing our awesome rental! For more Alaska 4×4 travel inspiration, check out their Instagram and Facebook accounts.

As always, the views and opinions expressed are entirely our own, and we only recommend brands and destinations that we 100% stand behind.

Ready to Book Your Trip? These Links Will Make It Easy:

Airfare:

Insurance:

  • Protect your trip and yourself with Squaremouth and Medjet
  • Safeguard your digital information by using a VPN. We love NordVPN as it is superfast for streaming Netflix
  • Stay safe on the go and stay connected with an eSim card through AloSIM

Our Packing Favs:

  • We LOVE Matador Equipment for their innovative products and sustainability focus. Their SEG45 is a game changer when you need large capacity while packing light.
  • Travel in style with a suitcase, carry-on, backpack, or handbag from Knack Bags
  • Packing cubes make organized packing a breeze! We love these from Eagle Creek

Like it? Pin it for later on Pinterest!

Hi! We are Jenn and Ed Coleman aka Coleman Concierge. In a nutshell, we are a Huntsville-based Gen X couple sharing our stories of amazing adventures through activity-driven transformational and experiential travel.





Source link