If You Own One Of These Routers, You’re At Risk






We may receive a commission on purchases made from links.

According to recent research, about 94% of American households have internet access, and 87% of these are through a fixed broadband subscription. This means that many homes rely on a router as the central point of their network. And, while there is no doubting their convenience, routers aren’t always as secure as they should be. Even secure routers can have weakened security just through common home WiFi mistakes. But even with all the proper steps taken, the problem can be inherent within the hardware itself. A point that the recent discovery of a “backdoor” into certain Tenda routers adequately demonstrates. 

Essentially, the problem is integrated into the firmware of the router itself. Researchers at CERT Coordination Center, based at Carnegie Mellon University, reported a login pathway that bypasses the normal username-and-password check. If someone knows the right password — one that shipped with the router — the device will simply let them in as an administrator. The hack is simple; all that needs to be done is to enter this password on the router’s login screen. It doesn’t matter what the username is; it can be Joe Blogs, Administrator, or just left blank. The router doesn’t check this. As long as the password matches the one stored in the router, it will quite happily grant administrator access. 

Once someone is logged into your router, they can carry out cyberattacks, like redirecting your traffic through malicious servers, opening network ports to expose devices on the network, installing ransomware, and launching man-in-the-middle attacks. They could even lock you out of your own router entirely. The vulnerability appears to be present in five firmware versions, and as of the time of writing, there is no confirmation that the Chinese manufacturer intends to release a patch for the flaw. 

What Tenda routers are affected and what should I do if I have one?

The CERT report has listed the affected firmware versions. You can check whether your router has affected firmware by accessing your router’s interface. The default IP address is 192.168.0.1 for Tenda routers. Entering this number into a browser’s address bar should bring up the router’s login page. From here, navigate to System Tools and from there select Upgrade. This will display your router’s current firmware version. Of course, if you wanted to take a shortcut, you could always just enter the rogue password, widely reported to be “rzadmin”, and see if it lets you in. 

The affected firmware is present in several older product lines. The list includes the FH1201 wireless router, W15E wireless hotspot routers, AC10 AC1200 Smart Dual-Band router (v1), AC5 AC1200 Smart Dual-Band router(v1), and the AC6 AC1200 router(v2). If you’re affected, there are a couple of things you can do. The first is to disable remote access on the router. Similar to checking the firmware version, this can be done through the router’s interface. Log on as described above, and click on AdvancedSecurityRemote Web Management. You should see a tick box that enables or disables remote management. Ensure this is unchecked. 

CERT also recommends you change the default LAN IP address. It’s best to keep the 192.168. part of the number, as this is an address range reserved for private networks. However, changing this to something like 192.168.201.1 or similar keeps you within that range. Although it’s important to note that neither value can exceed 255. It might also be time for a new router, as routers may need to be replaced quite often





Source link

Leave a Reply

Subscribe to Our Newsletter

Get our latest articles delivered straight to your inbox. No spam, we promise.

Recent Reviews






A 100-year-old World War II veteran was recently reunited with the tank he drove during the Battle of Iwo Jima. The tank was an M4 Sherman, and the veteran was Marine Corporal Leighton Willhite. The M4 Sherman was America’s most common tank during that war, with about 50,000 produced before the war’s end. It dominated the battlefield long after WWII.

The detective work behind the reunion of the soldier and the tank was performed by Jonathan Bernstein, Arms and Armor Curator at the National Museum of the Marine Corps. Bernstein did extensive research at the National Archives into the unique aspects of the tanks of the 5th Tank Battalion that served on Iwo Jima. It turns out that this specific tank, named “Lucky,” had countermeasures designed to minimize the effects of Japanese magnetic anti-tank mines. This included nails welded point-up onto its upper surfaces to prevent the mines from being placed flush against its upper body, where they would cause major armor damage. While the nails were gone, the weld scarring remained from where they’d been attached. Photographs shot during the battle confirmed that “Lucky” was present there on March 1, 1945. According to Bernstein, it is very rare to be able to put a specific crew together with the tank they operated, but it definitely happened here.

Corporal Willhite, who was 18 at the time, also demonstrated immense bravery when he and his commander left the tank to rescue another tank crew who became trapped. Willhite received the Bronze Star with Valor.

What role did Sherman tanks play in the Battle of Iwo Jima?

The M4 Sherman tanks, as exemplified by “Lucky,” played a key role in the Battle of Iwo Jima, where their biggest strengths and weaknesses were displayed. The volcanic sand terrain was difficult for the tanks to negotiate, causing many transmission failures for the Shermans. It’s also where three U.S. Marine divisions went up against a heavily fortified Japanese force that had no qualms about sacrificing itself to slow the Marines’ advance. 

A favorite Japanese tactic was to attack the Marines’ tanks with satchel charges strapped to their backs, detonating their charges after sliding underneath the tanks, where the armor was not as strong. Magnetic mines that stuck to the tanks’ bodies were also used by the Japanese. This led to a variety of “adaptations” made to the Sherman tanks. 

These included the welded-on nails, plus wooden planks along the sides of the tanks that protected the tanks’ suspensions and reduced the effects of shaped charges. In addition, there were other adaptations, including spraying sand onto freshly painted areas of the tank to prevent Japanese magnetic mines from adhering to it. Sections of the tanks’ tread, known as track blocks, were also spot-welded onto vulnerable parts of the tanks, such as the front and the turret, where they offered additional protection and could be accessed if spare parts were needed. According to a report from the 5th Tank Battalion on the subject of Iwo Jima, “The all-around performance of the M4A3 tank was exceptionally good.” During the five-week battle that ended in victory, 7,000 Marines died, and 20,000 were injured.

What happened to Lucky between Iwo Jima and its recovery at Camp Lejeune in 2002?

Following the victory at the Battle of Iwo Jima, “Lucky” went back to Hawaii, where it was refitted for its next planned role, showing how tanks shaped the course of WWII. Along with 71 other tanks, “Lucky” was converted into a flame-thrower tank, which replaced around 60% of its ammunition storage capacity with tanks capable of holding 300 gallons of napalm. The event that these 72 tanks were being prepared for was the invasion of Japan, which ended up not happening, thanks to the atomic bombs “Little Boy” and “Fat Man” being dropped on Hiroshima and Nagasaki, Japan, in August of 1945. This, combined with the concurrent Soviet invasion of Manchuria, led to Japan’s formal surrender in September of that year. 

Later, “Lucky” was used as a training tank for an indeterminate period, after which it was sent to Camp Lejeune, the Marine base in North Carolina. It was left in a wooded area of the base until it was discovered by some Marines in 2002, who sent it to the National Museum of the Marine Corps. And the rest is history.

The story of “Lucky” and Corporal Willhite is just one small piece of the vast World War II panorama of events that stretched across the entire world by the time it ended. It exemplifies how millions of American and other Allied soldiers were engaged in bloody battles across many different locations, fighting for a cause they truly believed in. There’s a reason that this cohort is known as “The Greatest Generation.”





Source link